login   |    register
Master Details [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
132
Bf-109 Tail Surfaces
Bf-109 Horizontal Tail Surfaces
  • move

by: Jean-Luc Formery [ TEDMAMERE ]


_ORGINPUB:
AeroScale

Product description
Here is a product description by the manufacturer:

"Hasegawa Messerschmitt Bf-109 model kits from Bf-109G series and later contain horizontal stabilizer and elevator parts molded in one piece for each side. The locating lugs on these parts are designed to interlock during assembly but are molded too long and at the wrong angle for the modeler to accomplish this correctly without modification.

This simple replacement set not only corrects the mounting lugs for easy and flawless assembly, but the horizontal stabilizers and elevators are molded as separate pieces allowing them to be positioned at more candid angles than the kit supplied parts. The real Messerschmitt Bf-109 had control surfaces actuated by cables and unless the control stick was locked in the neutral position, gravity would cause the elevators to droop into the lowered position.

Pressure cast in premium quality tan resin, these direct replacement horizontal tail surfaces are easily assembled using cyanoacrylate type adhesives. Our recommendation is BSI Super Thin Insta-Cure Cyanoacrylate from Bob Smith Industries. These finely detailed replacement horizontal tail surfaces for the "G" series Messerschmitt Bf-109 and later will add an element of authenticity and a unique look to your next model."


The set
Master Details from USA's new set comes in a small zip lock bag and consists of four ivory colored resin parts. These are, it seems, direct copies of the original Hasegawa parts with the notable exception that the movable parts are separate. Like previously mentionned, the locating lugs have been modified for better and easier assembly.

The quality of the parts is very good and the detail is crisply rendered. I found no air bubbles in my sample and only very light traces of flash that will be easy to remove. However, I have noticed some flow marks due to the manufacturing process (pressure casting). The result is that some areas of the surface are matt while others are smooth. But under a coat of paint the difference won't be visible so this won't have an impact on the look of the finished model.

The original kit parts have been modified so that they can be glued in the lowered position in a realistic way. The movable surfaces have been rounded at their leading edges and the horizontal rudder parts have been hollowed accordingly. The hinges have been accurately rendered as well.

Though it is mentionned nowhere in the product description, I assume these parts are destined to the G and later variants of the Bf-109.

Conclusion
Master Details from USA's 1:32 scale Bf-109 replacement Horizontal Tail Surfaces set is recommended to the lazy modeller who doesn't want to modify the original kit parts by himself. The new resin parts are simple and easy to use replacements.

If you want to more detailed informations or if you want to see more pictures, you can visit www.masterdetailsfromusa.com.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here on AeroScale.
SUMMARY
Highs: Easy to use replacement parts - Crisp detail
Lows: Surface finish is inconsistant
Verdict: Recommended if you want to show the horizontal control surfaces of your model in a realistic way without doing too much efforts.
Percentage Rating
83%
  Scale: 1:32
  Mfg. ID: 32021
  Suggested Retail: $9.95
  Related Link: 
  PUBLISHED: Feb 15, 2010
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.63%
  MAKER/PUBLISHER: 89.83%

Our Thanks to Master Details!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Jean-Luc Formery (TedMamere)
FROM: MOSELLE, FRANCE

I'm mainly interested in WW2 aircraft and I build them in 1/48 scale.

Copyright 2019 text by Jean-Luc Formery [ TEDMAMERE ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of Model Shipwrights. All rights reserved.



Comments

I've just ordered a set for the Hasegawa 1/32 G-10 I'm building for Terri's Bf 109 Campaign starting soon. I'll let you know how they go !! Cheers, D
FEB 14, 2010 - 09:10 PM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move